Fluke Instrument Repair

To get you up and running... FAST!

Fluke 1750 Power Recorder Repair

Image showing repair services for Fluke 1750 Power Recorders
Common issues:
  • Will not power on
  • Will not boot/start up
  • Backup battery not charging
  • Shutting off during power outage
  • Ethernet port not working
  • Can't connect to unit over a network
  • Voltage or amperage inputs inoperative
  • LEDs not working
  • Won't record to SD card
Typical Repair Cost Range: $1,450 - $2,475*
* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less

Tips & Pointers

A recorder that does not stay on or record through a power outage event likely has an internal backup power issue. The backup power unit is an integral part of the main baord and must be professionally serviced.
If the unit cannot be located on the network or the ethernet port is not working, the ethernet daughtercard is likely damaged or defective and must be serviced.
A channel that does not show activity on the LEDs or if the LEDs don't illuminate, the unit may have internal board damage due to impact to the front case or defective components on the main board.
How To Request Repair
  1. Tell us what is wrong with the instrument and who to contact by doing one of the following:
  2. Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
  3. We will diagnose the problem and send you a formal quote for repair.
Repair Request Form
Reminder: we are not accepting any repair requests for Fluke Scopemeters, multimeters, or process meters until May 20, 2024. Repairs of Fluke calibrators (5520A, 5700A, 9100, etc.) will continue to be processed normally.

Unit Information

Serial Number
Problem Description
* If your instrument's model is not listed, please note it above and CONTACT US for support options.

Contact Information

Apt, suite, etc.
Postal Code
Phone 1
Phone 2
Additional Information

What's next?

After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to our receiving address:

ScopemeterRepair.com, LLC
5641 Broyles Rd
Hartville, MO 65667
United States


No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.

Turnaround Time

Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.