* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less
Tips & Pointers
If the scope turns on then shuts back off, try disconnecting the battery and powering the unit from the charger adapter alone. If it powers on, the battery is likely defective and should be replaced. If the scope still turns off, further diagnosis and repair is necessary.
If the meter channel works but one or both of the scope input channels do not work, there is a problem with the channel conditioning and control circuit(s). Professional repair is required.
Calibration errors indicate a general fault with the channel being calibrated (e.g. A, B or Meter). Confirm the input is correct and attempt calibration again. If the failure persists, the unit must be serviced.
Our repair service is fast, easy, and professional. For over a decade, ScopemeterRepair.com has repaired hundreds of Fluke units for customers all around the world.
How To Request Repair
Tell us what is wrong with the instrument and who to contact by doing one of the following:
Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
We will diagnose the problem and send you a formal quote for repair.
Repair Request Form
* If your instrument's model is not listed, please note it above and CONTACT US for support options.
Apt, suite, etc.
After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to the address shown in the e-mail. Multimeters will ship to our Eastern lab while Scopemeters, calibrators, analyzers, and process meters will ship to our Midwest lab.
No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.
Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.