Fluke 215C Scopemeter Repair
Common issues:
- Will not power on
- Only beeps when power button is pressed
- Battery will not charge
- Scope input channels inoperative
- No waveform showing on channel A or B
- Solid line on channel A or B
- Errors during calibration
- Keypad buttons don't work or unresponsive
Typical Repair Cost Range: $495 - $895*
* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less
Tips & Pointers
If the scope turns on then shuts back off, try disconnecting the battery and powering the unit from the charger adapter alone. If it powers on, the battery is likely defective and should be replaced. If the scope still turns off, further diagnosis and repair is necessary.
If the meter channel works but one or both of the scope input channels do not work, there is a problem with the channel conditioning and control circuit(s). Professional repair is required.
Calibration errors indicate a general fault with the channel being calibrated (e.g. A, B or Meter). Confirm the input is correct and attempt calibration again. If the failure persists, the unit must be serviced.
How To Request Repair
- Tell us what is wrong with the instrument and who to contact by doing one of the following:
- Print our Service Request Form
- OR -
- Fill out the repair form below.
- Print our Service Request Form
- Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
- We will diagnose the problem and send you a formal quote for repair.
Repair Request Form
Unit Information
Model*
Serial Number
Problem Description
* If your instrument's model is not listed, please note it above and CONTACT US for support options.
Contact Information
Country
Name
Company
Address
Apt, suite, etc.
City
State/Province
Postal Code
Phone 1
Phone 2
E-Mail
SUBMITAdditional Information
What's next?
After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to our receiving address:
ScopemeterRepair.com, LLC
5641 Broyles Rd
Hartville, MO 65667
United States
ScopemeterRepair.com, LLC
5641 Broyles Rd
Hartville, MO 65667
United States
Payment
No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.
Turnaround Time
Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.