Fluke Instrument Repair

To get you up and running... FAST!

Fluke 724 Temperature Calibrator Repair

Image showing repair services for Fluke 724 Temperature Calibrators
Common issues:
  • Won't power on
  • Over-voltage damage
  • Missing/faded LCD display segments
  • Won't source/measure volts, resistance, ohms, or RTD
  • Won't measure mA (milliamp)
  • Won't source/measure TC (thermocouple)
  • Loose/broken input banana terminal jacks
  • Broken TC contacts
  • Corroded battery contact terminals
Typical Repair Cost Range: $425 - $675*
* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less

Tips & Pointers

If the calibrator will not power on, check the battery compartment for signs of corrosion on the battery terminals and replace the batteries if necessary.
DO NOT USE THIS UNIT LIKE A MULTIMETER! If the unit has been exposed to voltages higher than the rated input of 30V, internal damage has likely occurred to the main board and input circuitry and the unit must be professionally serviced.
How To Request Repair
  1. Tell us what is wrong with the instrument and who to contact by doing one of the following:
  2. Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
  3. We will diagnose the problem and send you a formal quote for repair.
Repair Request Form

Unit Information

Serial Number
Problem Description
* If your instrument's model is not listed, please note it above and CONTACT US for support options.

Contact Information

Apt, suite, etc.
Postal Code
Phone 1
Phone 2
Additional Information

What's next?

After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to the address shown in the e-mail. Multimeters will ship to our Eastern lab while Scopemeters, calibrators, analyzers, and process meters will ship to our Midwest lab.


No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.

Turnaround Time

Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.