Fluke 725Ex Multifunction Process Calibrator Repair
Common issues:
- Won't power on
- Over-voltage damage
- Missing/faded LCD display segments
- Resistance won't source/measure
- mA (milliamp) won't source/measure
Typical Repair Cost Range: $650 - $1,350*
* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less
Tips & Pointers
If the calibrator will not power on, check the battery compartment for signs of corrosion on the battery terminals and replace the batteries if necessary.
DO NOT USE THIS UNIT LIKE A MULTIMETER! If the unit has been exposed to voltages higher than the rated input of 30V, internal damage has likely occurred to the main board and input circuitry and the unit must be professionally serviced.
If the calibrator will not source mA (milliamps) or ohms, remove and test the fuses in the battery compartment (if equipped). If the fuses are good, the unit will need repair.
How To Request Repair
- Tell us what is wrong with the instrument and who to contact by doing one of the following:
- Print our Service Request Form - OR -
- Fill out the repair form below.
- Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
- We will diagnose the problem and send you a formal quote for repair.
Repair Request Form
Reminder: we are not accepting any repair requests for Fluke Scopemeters, multimeters, or process meters during November, 2024. All parts orders and repairs of Fluke calibrators (5520A, 5700A, 9100, etc.) will continue to be processed normally.
Unit Information
Model*
Serial Number
Problem Description
* If your instrument's model is not listed, please note it above and CONTACT US for support options.
Contact Information
Country
Name
Company
Address
Apt, suite, etc.
City
State/Province
Postal Code
Phone 1
Phone 2
E-Mail
SUBMIT
Additional Information
What's next?
After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to our receiving address:
ScopemeterRepair.com, LLC
5641 Broyles Rd
Hartville, MO 65667
United States
ScopemeterRepair.com, LLC
5641 Broyles Rd
Hartville, MO 65667
United States
Payment
No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.
Turnaround Time
Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.