Fluke Instrument Repair

To get you up and running... FAST!

Fluke 92 Scopemeter Repair

Image showing repair services for Fluke 92 Scopemeters
Common issues:
  • Will not power on
  • Battery won't charge/contacts corroded
  • Display or case is cracked/broken
  • Display is light or has poor contrast in the center and won't adjust
  • Keypad buttons not working or respond to presses
  • Won't read resistance or ohms
  • Inaccurate measurements
  • Input waveform signal won't trigger or hold steady
Typical Repair Cost Range: $225 - $425*
* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less

Tips & Pointers

If the Scopemeter will not turn on when a known good battery is installed and/or the unit is plugged into the charger adapter, it is possible the keypad contact foil could be defective. Replace the foil and try again. If the problem persists, further diagnosis and repair is necessary.
A faded LCD display screen with poor contrast that cannot be adjusted is likely the result of damaged optical films on the display. Environments with high heat and humidity, such as found in the tropics, is a know cause of this problem. The display assembly must be replaced.
How To Request Repair
  1. Tell us what is wrong with the instrument and who to contact by doing one of the following:
  2. Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
  3. We will diagnose the problem and send you a formal quote for repair.
Repair Request Form
Reminder: we are not accepting any repair requests for Fluke Scopemeters, multimeters, or process meters until May 20, 2024. Repairs of Fluke calibrators (5520A, 5700A, 9100, etc.) will continue to be processed normally.

Unit Information

Model*
Serial Number
Problem Description
* If your instrument's model is not listed, please note it above and CONTACT US for support options.

Contact Information

Country
Name
Company
Address
Apt, suite, etc.
City
State/Province
Postal Code
Phone 1
Phone 2
E-Mail
SUBMIT
Additional Information

What's next?

After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to our receiving address:

ScopemeterRepair.com, LLC
5641 Broyles Rd
Hartville, MO 65667
United States

Payment

No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.

Turnaround Time

Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.