Display is light or has poor contrast in the center and won't adjust
Keypad buttons not working or respond to presses
Won't read resistance or ohms
Input waveform signal won't trigger or hold steady
Typical Repair Cost Range: $225 - $525*
* Based on previous repairs; actual cost will be quoted after unit evaluation and may be more or less
Tips & Pointers
If the Scopemeter will not turn on when a known good battery is installed and/or the unit is plugged into the charger adapter, it is possible the keypad contact foil could be defective. Replace the foil and try again. If the problem persists, further diagnosis and repair is necessary.
A faded LCD display screen with poor contrast that cannot be adjusted is likely the result of damaged optical films on the display. Environments with high heat and humidity, such as found in the tropics, is a know cause of this problem. The display assembly must be replaced.
Our repair service is fast, easy, and professional. For over a decade, ScopemeterRepair.com has repaired hundreds of Fluke units for customers all around the world.
How To Request Repair
Tell us what is wrong with the instrument and who to contact by doing one of the following:
Ship the unit to us using your choice of carrier. Our shipping address depends on what model you are sending and will be shown on the confirmation e-mail.
We will diagnose the problem and send you a formal quote for repair.
Repair Request Form
Reminder: we are not accepting any repair requests for Fluke Scopemeters, multimeters, or process meters during the month of December, 2023. Repairs of Fluke calibrators (5520A, 5700A, 9100, etc.) and orders for parts and accessories will continue to be processed normally.
* If your instrument's model is not listed, please note it above and CONTACT US for support options.
Apt, suite, etc.
After submitting the form above, you will receive an e-mail confirmation with shipping instructions. Ship your unit to our receiving address:
ScopemeterRepair.com, LLC 5641 Broyles Rd Hartville, MO 65667 United States
No payment is due until all services are completed and the unit is ready to ship. We accept all major credit cards on our website and over the phone, PayPal, and checks or money orders.
Turnaround time is typically 5-10 business days but is workload-dependent and may vary. If you require immediate service, CONTACT US to let us know your requirements. We also offer 24-, 48-, and 72-hour turnaround times for most models for an additional fee.
NOTICE: a parts delay has caused a backlog of repair orders, therefore we will not be accepting any new Scopemeter, multimeter, or process meter repairs for the month of December, 2023. Repairs of Fluke calibrators and orders for parts and accessories will continue to be processed normally. If you have an emergency, contact us here: